Mehato ea Tharollo le Thibelo Bakeng sa Aluminium Die Casting e na le Mefokolo e Meholo e 10

Matšoao a Phallo le Mehlala

Ponahalo ea ponahalo: Ho na le metopa ka holim'a samente e lumellanang le phallo ea tšepe e qhibilihisitsoeng, 'me ho hlakile hore ho na le mela e sa tataiseng e fapaneng le matrix a tšepe ka' mala, 'me ha ho na mokhoa oa nts'etsopele.
1. Lisosa tsa matšoao a phallo ke tse latelang:

• Mocheso oa hlobo o tlase haholo
• Moralo o mobe oa semathi le boemo bo bobe ba heke e kahare
• Mocheso oa thepa o tlase haholo
• Lebelo la ho tlatsa le tlase le nako e khuts'oane ea ho tlatsa
• Sisteme e sa utloahaleng ea gating
• Ho felloa ke matla
• Spray e sa utloahaleng

2. Sesosa sa paterone ke pente e ngata haholo kahara lesoba kapa boleng bo bobe ba pente. Tharollo le mekhoa ea thibelo ke tse latelang:

• Fetola sebaka sa sefapano kapa boemo ba semathi se kahare
• Eketsa mocheso oa hlobo
• Fetola lebelo le khatello ea semathi se kahare
• Khetho e nepahetseng ea pente le phetoho ea litekanyetso

Mapheo a Moriri o Metsing

Ponahalo ea ponahalo: Bokaholimo ba likarolo tse lahlang li na le mesaletsa e ts'oanang kapa e sithabetseng maikutlo joalo ka moriri o joalo ka letlooa, o tla holisa le ho hola ha palo ea batho ba shoang e eketseha.

Mabaka a tjena:

• 1) Ho na le mapetso holim 'a lesoba la ho betsa
• 2) lekane preheating tsa shoa lahla hlobo

Tharollo le mekhoa ea thibelo ke:

• 1) The shoa-lahla hlobo lokela ho annealed kamehla kapa ka mor'a palo e itseng ea shoa-foromeletsoeng ho felisa khatello ea kelello ka cavity le
• 2) Ha leqhubu le hlahile holim 'a cavity, holim' a bōpa lokela ho e bentšitsoeng ho tlosa lera ufa
• 3) Preheat hlobo ka ho lekana

Sethibelo se batang

Ponahalo ea tlhahlobo: Bokaholimo ba betsa ea lefu bo na le mela e totobetseng, e sa tloaelehang, le e tebang (e phunyeletsang le e sa keneng). Sebopeho se nyane ebile se selelele, ka linako tse ling karolo ea mateano e boreleli, mme ho na le monyetla oa ho hakolla tlasa ts'ebetso ea matla a kantle.

Mabaka a tjena:

• 1) Melapo e 'meli ea tšepe e hokahane, empa ha e kopantsoe ka botlalo mme ha ho na inclusions lipakeng,' me matla a kopanyang a melapo e 'meli ea tšepe a fokola haholo.
• 2) Tšela mocheso kapa shoa-lahla mocheso e tlaase haholo
• 3) Boemo ba semathi bo fosahetse kapa tsela ea phallo e telele haholo
• 4) Lebelo le tlaase la ho tlatsa

Tharollo le mekhoa ea thibelo ke:

• 1) Eketsa hantle mocheso o tšollang
• 2) Ntlafatsa sekhahla sa ente, hatella nako ea ho tlatsa le ho eketsa lebelo la ente
• 3) Ntlafatsa maemo a ho qeta le ho tlatsa

Shrinkage (Denti)

Tlhahlobo e bonoang: Ho na le meno a boreleli (joalo ka li-disc) holim 'a botenya ba samente.

Mabaka a tjena:

• 1) E bakiloe ke ho fokotseha: Moralo o sa nepahalang oa likarolo tse laoloang ka lefu tse nang le phapang e kholo haholo ea lebota / boemo bo sa lokang semathi / Boemo ba ente bo tlase, nako ea khatello e tlase e khuts'oane, 'me mocheso oa lehae oa hlobo ea tšepe e phahameng haholo
• 2) Moralo oa sistimi e pholileng e sa utloahaleng
• 3) Ho bula hlobo kapele haholo
• 4) Mocheso o tšollang o phahame haholo

Tharollo le mekhoa ea thibelo ke:

• 1) Botenya ba lerako bo lokela ho tšoana
• 2) Phetoho ea botenya e lokela ho bebofatsoa
• 3) Khetha ka nepo boemo ba kenyelletso ea mokelikeli oa alloy le ho eketsa sebaka sa sefapano sa semathi se kahare
• 4) Eketsa khatello ea ente le ho lelefatsa nako ea khatello e ts'oereng khatello
• 5) Fokotsa ka nepo mocheso o tšollang le mocheso o shoang
• 6) Haholo pholile ea moo mocheso phahameng
• 7) Ntlafatsa maemo a phallo

Litšoantšo

Visual tlhahlobo: mesaletsa setseng ke ho ikopanya le pakeng tsa holim 'a betsa le holim' a shoa-foromeletsoeng cavity kapa matshwao mohato hlaha holim'a metsi lahla.

Mabaka a tjena:

1. E bakoa ke likarolo tsa ejector

• 1) Sefahleho sa ho qetela sa molamu oa ejector se apere
• 2) Bolelele ba phetoho ea molamu oa ejector ha bo lumellane
• 3) Karolo e hloekisang ea sekoti se shoang ha e lumellane hantle le likarolo tse ling

2. E bakoa ke ho tšela kapa ho tsamaisa likarolo

• 1) Karolo inlay e hlephileng
• 2) Likarolo tse hlephileng kapa tse senyehileng tse tsamaeang
• 3) Karolo e ka lehlakoreng ea lebota la ho betloa e thehiloe ke likhakanyo tse kopantsoeng ke hlobo e tsamaeang le e tsitsitseng

Tharollo le mekhoa ea thibelo ke:

• 1) Bolelele ba molamu oa ejector bo lokela ho fetoloa hore bo be maemong a nepahetseng
• 2) Potlakisa ho kenya kapa likarolo tse ling tse tsamaeang
• 3) Tlosa likhutlo tse bohale ha u rala, 'me u ikamahanya le ho lekana lekhalo
• 4) Ntlafatsa sebopeho sa castings ho felisa kenella inlay foromo ea shoa-lahla hlobo le ho ntlafatsa sebopeho sa hlobo shoa-lahla

Mesaletsa ea Adherents

Ponahalo ea ponahalo: li-flakes tse nyane le tšepe kapa likarolo tsa tšepe tse sa tšepe le li-welded, 'me li-flakes tse nyane li eboloa ka tlasa tšebetso ea matla a kantle. Kamora ho ebola, bokaholimo ba ho betsa boa khanya 'me bo bong bo botšo bo lefifi.

Mabaka a tjena:

• 1) Ho na le masala a tšepe kapa a se nang tšepe holima mokoti o shoang
• 2) Ha ho tšeloa litšila li tlisoa pele ebe li hokeloa holim 'a mokoti

Tharollo le mekhoa ea thibelo ke:

• 1) Pele ho lahleloa lefu, kamore ea khatello ea mokokotlo le sistimi e tšollang li lokela ho hloekisoa ho tlosa balateli ba tšepe kapa bao e seng tšepe
• 2) Hloekisa motsoako oa li-cast
• 3) Khetha pente e nepahetseng, 'me seaparo se lokela ho lekana

Ho beha (Pinching And Peeling)

Tlhahlobo e bonoang kapa tlhahlobo ea tšenyo: Ho na le likarolo tse hlakileng tsa tšepe karolong eo.

Mabaka a tjena:

• 1) hlobo ha e thata ka ho lekaneng. Nakong ea ts'ebetso ea ho tlatsa tšepe, template e tla sisinyeha
• 2) Punch e bonahala e khasa nakong ea ts'ebetso ea ente
• 3) Moralo o sa nepahalang oa sistimi ea semathi

Tharollo le mekhoa ea thibelo ke:

• 1) Matlafatsa ho tenyetseha ha hlobo le ho tiisa likarolo tsa hlobo ho li tiisa
• 2) Fetola tšebelisano 'moho ea litebele le phaposi ea khatello ho felisa ketsahalo e khasang
• 3) Rala ka nepo semathi se kahare

Khohlano Le Phello

Tlhahlobo ea pono: Bokaholimo ba karolo e lahlang e na le bokaholimo maemong a mang.

Mabaka a tjena:

• 1) Boemo bo sa nepahalang, tataiso le sebopeho sa semathi se kahare se bakiloeng ke hlobo e lahlang (hlobo)
• 2) Pholiso e sa lekaneng ea tšepe e qhibilihisitsoeng ho semathi se kahare se bakoang ke maemo a ho lahla

Tharollo le mekhoa ea thibelo ke:

• 1) Ho ntlafatsa boemo le tataiso ea sprue moo ho seng hotle ho tšela
• 2) Ntlafatsa maemo a pholileng, haholoholo libaka tseo tšepe e qhibilihisitsoeng e qhekelloang ka matla
• 3) Kenya pente karolong e tlotsitsoeng
• 4) Fetola sekhahla sa phallo ea mokelikeli oa alloy ho thibela cavitation
• 5) Felisa balateli ba motsoako ka hlobo (hlobo)

Eikoko

Visual tlhahlobo: Ho na le pitting kapa o khabisitsoeng ka boemo ba lehae la lahla shoela'ng.

Mabaka a tjena:

• 1) Boemo bo sa nepahalang ba boemo ba semathi se kahare
• 2) Maemo a futhumetseng a futsanehileng

Tharollo le mekhoa ea thibelo ke:

• 1) Botenya ba semathi se kahare bo lokela ho ba bo loketseng
• 2) Fetola boemo, tataiso le mokhoa oa ho beha semathi se kahare
• 3) Matlafatsa pholiso ea likarolo tse sentsoeng.

mapetsong

Tlhahlobo e bonoang: Beha ho lahla ka tharollo ea alkaline, mapetso a lefifi. Ho senyeha le ho petsoha hoa matrix a tšepe ho otlolohile kapa ho ba le wavy, ka mela e moqotetsane le e telele, e nang le tloaelo ea ho nts'etsapele tlasa ts'ebetso ea mabotho a kantle.

Lisosa tsa mapetso a li-castings tsa aluminium alloy:

• 1) Litaba tsa tšepe ka alloy li phahameng haholo kapa likahare tsa silicon li tlase haholo; Likahare tsa litšila tse kotsi ho alloy li phahameng haholo, tse fokotsang polasetiki ea motsoako; dikahare tsa zinki kapa koporo ka motsoako oa aluminium-silicon, aluminium-silicon-koporo e phahameng haholo; dikahare tsa motsoako oa aluminium-magnesium li phahameng haholo Magnesium e ngata haholo
• 2) Nako ea ho boloka hlobo e khuts'oane haholo, 'me khatello e ts'oereng nako e khuts'oane; botenya ba lebota la ho betsa bo na le liphetoho tse kholo
• 3) Matla a tlamang a lehae a maholo haholo, mme matla ha a lekana ha a lelekoa

Tharollo le mekhoa ea thibelo:

• 1) Laola sebopeho sa motsoako ka nepo. Maemong a mang: li-ingots tse hloekileng tsa aluminium li ka kenyelletsoa ho alloy ho fokotsa boleng ba magnesium ka har'a motsoako; kapa li-alloys tse hloahloa tsa aluminium-silicon li ka eketsoa ho alloy ho eketsa litaba tsa silicon
• 2) Eketsa mocheso oa hlobo (hlobo); fetola sebopeho sa ho betsa, fetola mochini oa ho hula oa mantlha kapa ho etsa hore molamu oa khatello o ts'oane
• 3) Eketsa sekhahla sa moralo 'me u sebelise moemeli ea matla oa tokollo sebakeng sa heno
• 4) Eketsa nako ea ho boloka hlobo le ho eketsa nako ea khatello

Ka kopo boloka mohloli le aterese ea sengoloa sena hore se hatisoe hape:Mehato ea Tharollo le Thibelo Bakeng sa Aluminium Die Casting e na le Mefokolo e Meholo e 10

Minghe Khamphani ea Die Casting li inehetse ho etsa le ho fana ka boleng bo phahameng le likarolo tse phahameng tsa ho lahla likarolo Thining-Wall Die Casting,Hot Chamber Die lahla,Cold Chamber shoa lahla), Tšebeletso e chitja (Die Casting Service,Cnc Machining,Ho Etsa Mofuta, Bokaholimo Phekolo) .Na tloaelo efe kapa efe ea Aluminium die die cast, magnesium kapa Zamak / zinc die casting le litlhoko tse ling tsa castings lia amoheleha ho ikopanya le rona

Tlas'a taolo ea ISO9001 le TS 16949, lits'ebetso tsohle li etsoa ka mechini e makholo ea li-die casting, mechini e 5-axis le lits'ebeletso tse ling, ho tloha ho li-blasters ho isa mechini ea ho hlatsoa ea Ultra Sonic. sehlopha sa baenjiniere ba nang le boiphihlelo, lisebelisoa le bahlahlobi ho etsa moralo oa moreki o phethahala.

Moetsi oa konteraka oa li-cast cast. Bokhoni bo kenyelletsa likarolo tse batang tsa aluminium die die likarolo tsa 0.15 lbs. ho isa ho li-6 lbs., Ho theha phetoho e potlakileng, le machining. Litšebeletso tse kenyellelitsoeng boleng li kenyelletsa ho bentsa, ho thothomela, ho qhekella, ho phatloha ha lithunya, ho penta, ho roala, ho roala, kopano le lisebelisoa. Lisebelisoa tse sebelisitsoeng le tsona li kenyelletsa lits'epe tse kopantsoeng tse kang 360, 380, 383 le 413.

Zinc e shoa ho lahla thuso ea moralo / lits'ebeletso tsa boenjineri tse tšoanang. Moetsi oa moetlo oa li-castings tsa zinc tse nepahetseng. Li-castings tse nyane, li-castings tse phahameng tsa khatello, li-cast cast tsa hlobo, li-castings tse tloaelehileng tsa hlobo, li-unit tsa die le li-cast cast tse ikemetseng le li-cast cast tse tiisitsoeng li ka etsoa. Li-castings li ka etsoa ka bolelele le bophara ho fihlela 24 ho. Ho +/- 0.0005 ho. Mamello.  

ISO 9001: Moetsi ea netefalitsoeng oa 2015 oa magnesium ea die die, Bokhoni bo kenyelletsa khatello e phahameng ea khatello ea magnesium die cast to 200 ton room & 3000 kamoreng e batang, moralo oa lithulusi, polishing, molding, machining, powder & liquid paint, QA e felletseng e nang le bokhoni ba CMM , kopano, ho paka le ho tsamaisa.

ITAF16949 e netefalitsoe. Ts'ebeletso e 'ngoe ea ho lahla e kenyeletsa ho lahla lichelete,ho lahla lehlabathe,Matla a khoheli, Lahlehileng bubble lahla,Ho ts'oaroa ha Centrifugal,lephaka lahla,Sa Feleng hlobo lahlaBokhoni bo kenyelletsa EDI, thuso ea boenjiniere, ho etsa mohlala o tiileng le ho sebetsoa ka bobeli.

Lahla Liindasteri Liphuputso tsa likarolo tsa likarolo tsa: Likoloi, libaesekele, lifofane, liletsa tsa 'mino, sesepa sa metsi, lisebelisoa tsa Optical, li-sensor, mehlala, lisebelisoa tsa elektroniki, masaka, lioache, mechini, lienjine, thepa ea ka tlung, mabenyane, mabenyane, telecom, mabone, lisebelisoa tsa bongaka, lisebelisoa tsa litšoantšo, Liroboto, Litšoantšo tse betliloeng, Lisebelisoa tsa molumo, Lisebelisoa tsa lipapali, Lithulusi, Lipapali le tse ling. 

Re ka u thusa ho etsa eng ka mor'a moo?

∇ Eya ho Homepage Bakeng sa Shoa lahla China

By Moetsi oa Minghe Die Casting | Categories: Lingoloa tse thusang |lintho tse bonahalang Tags: Aluminium lahla, Ho lahla zinki, Ho lahla Magnesium, Lahleloa thaethaniamo, Ho lahla tšepe, Brass lahla,Ho lahleloa ka Bronze,Ho lahla Video,Histori ea Khamphani,Aluminium Die Casting | Litlhaloso Off